Home › Leak Detection in Clayton

Leak detection · Clayton VIC 3168

Leak Detection in Clayton

A high water bill, a damp patch that will not dry or a meter that never stops ticking usually means a hidden leak. We find it with the right tools before opening anything up. Call 03 9088 4192.

Plumber scanning a damp patch at the base of a hallway wall with a thermal imaging camera
Call a Clayton plumber03 9088 4192Licensed · local · price agreed first
Licensed and insured Clayton 3168 based After-hours help

Signs of a hidden leak

  • A water bill much higher than usual without any change in use
  • The water meter moving when every tap in the house is off
  • Damp or stained patches on walls, ceilings or floors
  • Paint bubbling or skirting boards swelling
  • A musty smell or mould in one area
  • Warm patches in a floor, which can mean a hot water pipe leak under a slab
  • Soggy ground or unusually green grass along the line of the water service
  • The sound of running water when nothing is on

The meter test

You can do this yourself. Turn off every tap and water-using appliance in the house. Then look at your water meter and note the reading, or watch the small dial. Wait thirty minutes without using any water and check again. If the reading has changed, water is escaping somewhere.

How we find leaks

Thermal imaging

A thermal camera shows temperature differences on the surface of walls, floors and ceilings. Water evaporating from a damp area is usually cooler than its surroundings, and a leaking hot water pipe shows as a warm streak. Thermal imaging helps us narrow down where a leak is without damaging anything.

Acoustic detection

Water escaping under pressure makes a sound. With sensitive listening equipment we can hear leaks in pipes under concrete, beneath paving or inside walls, and pinpoint where the sound is loudest.

Moisture meters

Moisture meters measure dampness in plaster, timber and concrete. Mapping moisture levels across an area shows where the water is coming from and how far it has spread.

Pressure testing

By isolating sections of the plumbing and checking whether they hold pressure, we can identify which part of the system is leaking.

Common leaks in Clayton homes

Galvanised pipes

Older homes with original galvanised water pipes are prone to pinhole leaks as the pipe corrodes. These often occur under timber floors or in wall cavities.

Shower leaks

A leaking shower is one of the most common causes of damp walls and floors. Water can escape through failed grout, a broken waterproofing membrane, a cracked shower base or a leaking mixer connection behind the tiles. Signs include swelling skirting boards in the next room, loose tiles and mould at the base of walls.

Underground water service

The pipe from the water meter to the house can leak underground, particularly if it is old galvanised pipe or has been damaged by tree roots.

Slab leaks

In homes and townhouses built on concrete slabs, a leak in a pipe under or inside the slab can be hard to spot. A warm floor, a damp carpet or an unexplained jump in the water bill can all be signs.

After we find the leak

We show you where the leak is and explain the repair options, including how much access is needed. In many cases we can repair the leak with minimal disruption. Where a section of pipe is badly corroded, we may recommend rerouting a new line rather than repairing the old one in place.

Leak detection for insurance

Many insurers need to know the cause of water damage before approving a claim. We provide a written report with thermal images, photos and a description of the leak and the repair.

Concession for leaks

South East Water may offer an allowance on bills caused by a hidden leak once it has been repaired by a licensed plumber. Our invoice and report can support that application.

Leaks in townhouses and apartments

In multi-level homes, water from a leak can travel along floor framing and appear well away from its source. We trace the path back carefully. Where a leak may involve a neighbouring dwelling or common property, we document our findings so owners or the owners corporation can decide how to proceed.

Pool and irrigation leaks

Garden irrigation systems and pool top-up lines can leak underground without anyone noticing. If your meter test shows a leak but the house checks out, we test those lines too. Isolating each system in turn quickly shows which one is losing water.

Included

What comes with every leak detection job

DiagnosisWhichever test tool suits the fault, and you see the result for yourself
PriceSettled face to face before we start, and confirmed in writing on bigger work
Who does itA Victorian-licensed, insured plumber, never an unqualified offsider
PartsWaterMark-approved materials fitted to the plumbing code
RecordsA Victorian compliance certificate where the law calls for one, and photos on request
FinishRun and checked in front of you, then swept up and cleared away

Questions

Leak Detection in Clayton: your questions

How do I know if I have a leak?

Turn off all taps and check whether the water meter keeps moving. If it does, there is a leak.

Can you find a leak without breaking walls?

In most cases, yes. Thermal imaging, acoustic listening and moisture meters let us locate leaks before opening anything up.

Is a leaking shower covered by insurance?

Policies vary. Many cover sudden water damage but not gradual leaks. Our report helps you understand and support a claim.

Can South East Water reduce my bill for a leak?

South East Water may offer an allowance once a licensed plumber has fixed the leak. Our documentation supports that request.

How long does leak detection take?

Most leaks are found within an hour or two, though complex cases can take longer.

Do you repair the leak once it is found?

Yes. Once we have located the leak we explain the repair options and, once you agree the price, carry out the repair and test it.

Can a leak under a concrete slab be found?

Yes. Acoustic detection and thermal imaging help locate leaks under slabs, and we explain options for repair or rerouting.

Book or get a quote

Tell us about the job

Fill in the basics and a licensed Clayton plumber will ring you back. If water is escaping right now, skip the form and phone 03 9088 4192.

03 9088 4192

Prices are never listed online. We inspect first, then settle the cost with you before a single tool comes out.







    How a job runs

    From the first call to the final check

    1. 1Call or send the form

      Tell us what is going on and what kind of place it is. Snap a picture of the leak, the drain or the sticker on your cylinder and send it through, so the right spares come with us.

    2. 2We find the cause

      On site we track down the fault, show you what we found and agree the price with you. No work starts until you are happy.

    3. 3We fix and test it

      Repairs are done to the Plumbing Code of Australia and the relevant standards, then run and checked with you there.

    4. 4Clean up and paperwork

      Old parts go in the van, the area is left tidy, and you get a written summary plus a compliance certificate where one is required.

    Where we work

    Clayton first, then the suburbs either side of it

    Most days begin within a few streets of Clayton Road. From there it is a short run up to Notting Hill and Mount Waverley past the university, west along Centre Road to Oakleigh, Huntingdale and Oakleigh South, south over Heatherton Road into Clayton South, and east along Wellington Road and the Princes Highway to Mulgrave and Springvale. Somewhere else nearby? Ring 03 9088 4192 and we will tell you honestly if we can get there.

    Plumbing problem in Clayton? Talk to the plumber who will fix it.