Home › Water Pressure Problems in Clayton

Water pressure · Clayton VIC 3168

Water Pressure Problems in Clayton

A weak shower, a tap that splutters or pipes that bang when taps close all point to a pressure problem. We measure it properly and fix the cause. Call 03 9088 4192.

Plumber reading a pressure gauge fitted to an outside garden tap on a brick wall
Call a Clayton plumber03 9088 4192Licensed · local · price agreed first
Licensed and insured Clayton 3168 based After-hours help

Low pressure symptoms

  • A weak shower, especially when another tap is running
  • Slow-filling toilets and washing machines
  • Taps that splutter or deliver uneven flow
  • Low pressure at one fixture but not others

High pressure symptoms

  • Pipes banging when taps or appliances shut off
  • The hot water relief valve dripping constantly
  • Taps and toilet valves wearing out quickly
  • Leaks at joints and appliance hoses

Testing pressure

We fit a pressure gauge to an outside tap near the meter to measure the incoming mains pressure, then test at fixtures inside the house. Comparing the readings shows whether the problem is the supply, the pipes in between or a single fixture.

Causes of low pressure

Corroded galvanised pipe

Many older Clayton homes still have galvanised water pipe. Rust builds up inside until the bore narrows significantly, restricting flow. This is one of the most common causes of poor pressure in homes from the 1950s and 1960s. Replacing the worst sections, often starting with the main line from the meter, makes a dramatic difference.

Partly closed or faulty valves

A main stop tap that has not been fully opened after work, or a failing isolation valve, can restrict flow.

Blocked aerators and filters

Tap aerators and shower heads collect grit and scale over time. Cleaning or replacing them is a simple fix.

Failing pressure limiting valve

A pressure limiting valve that has failed can reduce pressure far below what it should.

Leaks

A hidden leak can reduce pressure at the fixtures. If your meter moves with all taps off, we will look for the leak.

Causes of high pressure

Mains pressure can be high in some parts of the network. Without a pressure limiting valve, that pressure goes straight to your taps, toilets and appliances. Australian Standards set a maximum pressure at outlets inside the home, and new installations usually include a limiting valve. Older homes often do not have one.

Pressure limiting valves

A pressure limiting valve fitted after the meter reduces the incoming pressure to a safe level. It protects pipes, taps, toilets, hot water systems and appliances from wear and stops banging pipes. We install, test and replace pressure limiting valves.

Water hammer

The bang you hear when a tap shuts quickly is called water hammer. It is caused by water suddenly stopping in the pipe. High pressure, loose pipes and fast-closing valves on washing machines and dishwashers make it worse. We fix it by reducing pressure, securing loose pipes and fitting water hammer arrestors where needed.

Hot water pressure

If the hot water pressure is noticeably weaker than the cold, the problem may be in the hot water system, its valves or the tempering valve. We check those as part of a pressure assessment.

Pressure in two-storey homes

Upstairs showers in two-storey townhouses can feel weaker than downstairs, because water loses a little pressure as it rises. Usually the difference is small. If upstairs pressure is poor, the cause is often undersized pipe, a partly closed valve or a restrictive shower head rather than the mains. We test and recommend the right fix.

Pressure and new fixtures

Some modern tapware and shower systems are designed for particular pressure ranges. If you are renovating, tell us what you plan to install so we can check it will perform well with your supply.

Booster pumps

In rare cases where mains pressure is low and cannot be improved, a pressure booster pump can raise pressure at the fixtures. Pumps need power, regular maintenance and a suitable location, so we only recommend them when other causes have been ruled out. Most low-pressure problems in Clayton are solved by replacing corroded pipe or fixing a faulty valve.

Shower heads and flow

Water-efficient shower heads save water and energy, but a poor-quality one can feel weak. A well-designed efficient head gives a satisfying shower at lower flow. If your shower feels weak after fitting a new head, it may simply be the wrong model for your pressure. We can recommend better options.

Included

What comes with every water pressure job

DiagnosisWhichever test tool suits the fault, and you see the result for yourself
PriceSettled face to face before we start, and confirmed in writing on bigger work
Who does itA Victorian-licensed, insured plumber, never an unqualified offsider
PartsWaterMark-approved materials fitted to the plumbing code
RecordsA Victorian compliance certificate where the law calls for one, and photos on request
FinishRun and checked in front of you, then swept up and cleared away

Questions

Water Pressure in Clayton: your questions

Why is my shower pressure so weak?

Common causes include corroded galvanised pipes, a blocked shower head, a failing valve or a hidden leak. We test and find the cause.

What is a pressure limiting valve?

A valve fitted after the meter that reduces mains pressure to a safe level, protecting your plumbing and appliances.

Why do my pipes bang?

Usually water hammer from high pressure or fast-closing valves. Reducing pressure and securing pipes usually fixes it.

Can high pressure damage my hot water system?

Yes. High pressure can make the relief valve drip and shorten the life of the system.

Is low pressure the water authority's problem?

Sometimes, but most low pressure problems are inside the property. We test at the meter to find out.

Do I need a pressure limiting valve?

If your mains pressure is above the recommended maximum for household fixtures, a pressure limiting valve protects your plumbing. We test to find out.

Can low pressure be caused by a leak?

Yes. A hidden leak can reduce pressure at your fixtures. If the meter moves with all taps off, we look for the leak first.

Book or get a quote

Tell us about the job

Fill in the basics and a licensed Clayton plumber will ring you back. If water is escaping right now, skip the form and phone 03 9088 4192.

03 9088 4192

Prices are never listed online. We inspect first, then settle the cost with you before a single tool comes out.







    How a job runs

    From the first call to the final check

    1. 1Call or send the form

      Tell us what is going on and what kind of place it is. Snap a picture of the leak, the drain or the sticker on your cylinder and send it through, so the right spares come with us.

    2. 2We find the cause

      On site we track down the fault, show you what we found and agree the price with you. No work starts until you are happy.

    3. 3We fix and test it

      Repairs are done to the Plumbing Code of Australia and the relevant standards, then run and checked with you there.

    4. 4Clean up and paperwork

      Old parts go in the van, the area is left tidy, and you get a written summary plus a compliance certificate where one is required.

    Where we work

    Clayton first, then the suburbs either side of it

    Most days begin within a few streets of Clayton Road. From there it is a short run up to Notting Hill and Mount Waverley past the university, west along Centre Road to Oakleigh, Huntingdale and Oakleigh South, south over Heatherton Road into Clayton South, and east along Wellington Road and the Princes Highway to Mulgrave and Springvale. Somewhere else nearby? Ring 03 9088 4192 and we will tell you honestly if we can get there.

    Plumbing problem in Clayton? Talk to the plumber who will fix it.