Renovations · Clayton VIC 3168
Bathroom Renovation Plumbing in Clayton
Plumbing is the first trade in and the last trade out of every bathroom renovation. We plan the pipework, set it out while the room is bare and return after the tiler to connect every fixture, in homes right across Clayton. Call 03 9088 4192.

What we do in a renovation
Disconnection and strip-out
Before the room is stripped, we isolate and cap the water supply and disconnect fixtures safely, so demolition can proceed without leaks.
Rough-in
Once the room is bare, we set out the new plumbing to suit the layout: water points for the shower, basin, bath and toilet, waste pipes and floor wastes, and the mixer bodies inside the wall. Getting positions and heights right at this stage is critical, because changes after tiling are costly.
Inspections and testing
We pressure test the new water pipes before walls are closed, and we work with your builder or waterproofer so the floor wastes and penetrations suit the waterproofing membrane.
Fit-off
After tiling, we return to install the vanity, basin, tapware, toilet, shower rose, bath and accessories. We connect everything, test for leaks and make sure each fixture works properly.
Compliance
We issue a compliance certificate for the plumbing work, as required in Victoria.
Renovating a 1960s Clayton bathroom
Clayton's older homes often still have the original bathroom, sometimes with pastel tiles and a separate toilet room. Common upgrades include combining the toilet and bathroom, converting a bath to a walk-in shower, and moving the vanity or toilet to improve the layout.
Renovation is also the best time to deal with the hidden plumbing. Old galvanised pipes inside the walls can be replaced with copper or polyethylene while the walls are open. We can also run a camera through the floor waste and sewer connection before new tiles go down, so you are not tiling over a damaged pipe.
Level-entry showers
Walk-in showers with no step or hob are popular, especially for accessibility. They need careful planning of floor levels, falls and waste positions, and sometimes a linear grate. On timber floors this may mean lowering the floor framing. We work with your builder to plan it properly.
Laundries
We also plumb laundry renovations, including new troughs, washing machine taps, floor wastes and connections for dryers with condensate drains.
Working with your builder or tiler
Many of our renovation jobs are part of a larger project managed by a builder or the owner. We coordinate timing with other trades, attend site meetings when needed, and leave clear notes on positions for tilers and carpenters.
Choosing fixtures
We can advise on tapware, toilets and shower systems that suit your water pressure and layout, and make sure everything carries WaterMark certification. If you are buying your own fixtures, check with us before purchasing so we can confirm they will work with the rough-in.
Rental bathroom refreshes
Landlords upgrading rental bathrooms between tenancies often want durable, easy-to-maintain fixtures and fast turnaround. We can plan the work to fit a tight vacancy window.
Timeline of a typical renovation
A typical bathroom renovation follows a set sequence: strip-out, plumbing rough-in, electrical rough-in, framing and sheeting, waterproofing, tiling, then plumbing fit-off and final touches. Plumbing appears at both ends, and getting the rough-in right decides how smoothly everything after it goes. We give you a clear idea of when we need to be on site and how long each stage takes.
Common mistakes to avoid
- Buying a vanity, toilet or mixer without checking it suits the planned rough-in
- Leaving old galvanised pipe inside newly tiled walls
- Not checking the floor waste and sewer before tiling
- Forgetting to plan for an isolation valve on each fixture
We help you avoid these at the planning stage.
Ensuites in townhouses
Adding an ensuite to an existing home often means connecting to the sewer from a new position. On a timber floor this is usually straightforward. On a slab, it may involve cutting the slab to run the waste. We assess the options at the planning stage so there are no surprises once work begins.
Accessible bathrooms
For older owners or family members with limited mobility, an accessible bathroom with a level-entry shower, grab rails, a comfort-height toilet and lever tapware can make a big difference to daily life. We can plan the plumbing for accessibility from the start.
Included
What comes with every bathroom renovation plumbing job
Questions
Bathroom Renovation Plumbing in Clayton: your questions
When do I need a plumber in a bathroom renovation?
At the start to disconnect and rough-in, and at the end to fit off fixtures. We may also be needed for testing before walls are closed.
Can you move my toilet to a new position?
Usually yes, though it depends on the floor type and the location of the sewer. We assess and advise during planning.
Should I replace old pipes during a renovation?
If the walls are open and the pipes are old galvanised steel, replacing them is often worthwhile while access is easy.
Do you issue a compliance certificate?
Yes. We issue a compliance certificate for the plumbing work as required in Victoria.
Can you work with my builder?
Yes. We regularly work with builders, tilers and waterproofers and coordinate timing with them.
How long does the plumbing take in a bathroom renovation?
Rough-in usually takes a day or two and fit-off a day, depending on the size of the room and the number of fixtures.
Can you supply the fixtures?
We can supply fixtures or install ones you have chosen. Check with us before buying so we can confirm they suit the rough-in.
Worth reading
Before you call, read this
Book or get a quote
Tell us about the job
Fill in the basics and a licensed Clayton plumber will ring you back. If water is escaping right now, skip the form and phone 03 9088 4192.
Prices are never listed online. We inspect first, then settle the cost with you before a single tool comes out.
How a job runs
From the first call to the final check
- 1Call or send the form
Tell us what is going on and what kind of place it is. Snap a picture of the leak, the drain or the sticker on your cylinder and send it through, so the right spares come with us.
- 2We find the cause
On site we track down the fault, show you what we found and agree the price with you. No work starts until you are happy.
- 3We fix and test it
Repairs are done to the Plumbing Code of Australia and the relevant standards, then run and checked with you there.
- 4Clean up and paperwork
Old parts go in the van, the area is left tidy, and you get a written summary plus a compliance certificate where one is required.
Other services
More plumbing help in Clayton
Where we work
Clayton first, then the suburbs either side of it
Most days begin within a few streets of Clayton Road. From there it is a short run up to Notting Hill and Mount Waverley past the university, west along Centre Road to Oakleigh, Huntingdale and Oakleigh South, south over Heatherton Road into Clayton South, and east along Wellington Road and the Princes Highway to Mulgrave and Springvale. Somewhere else nearby? Ring 03 9088 4192 and we will tell you honestly if we can get there.