Guide · Clayton homes
Shared drains on townhouse sites
When a Clayton block is split into townhouses, the drains are often shared. Knowing how your site is laid out helps settle who pays when something blocks.
How subdivided sites are plumbed
When an original house is replaced with two, three or four townhouses, each dwelling usually gets its own branch drain. Those branches often join a common line running down the driveway before connecting to the sewer at the property boundary. Stormwater is often handled the same way, with shared pits and pipes collecting from several roofs and driveways.
Water meters are usually grouped together near the front boundary, one for each dwelling.
Who is responsible
As a general guide:
- Your own branch drain, up to where it joins the shared line, is usually your responsibility.
- The shared section is usually the shared responsibility of all owners connected to it, or of the owners corporation if there is one.
- The sewer beyond the property connection point belongs to South East Water.
Your plan of subdivision and owners corporation rules may set this out in more detail.
Why location matters
When a blockage occurs, the first question is where it is. If it is in your branch, only you are affected. If it is in the shared line, everyone upstream will notice problems. A plumber can locate the blockage using access points and a camera.
What we provide
When we clear a blockage on a townhouse site, we note where it was, what caused it and whether the pipe is damaged. We can provide camera footage and a simple sketch. That information helps owners or the owners corporation decide how to share costs.
Tips for owners
- Find out where your branch joins the shared line.
- Keep inspection openings accessible.
- Agree with neighbours in advance how shared drain costs will be split.
- Keep records of any work done on the shared line.
Book or get a quote
Tell us about the job
Fill in the basics and a licensed Clayton plumber will ring you back. If water is escaping right now, skip the form and phone 03 9088 4192.
Prices are never listed online. We inspect first, then settle the cost with you before a single tool comes out.
Worth reading